Selection of CNC Machine Tool Milling Cutter

CNC machine tool hard table gold indexable face milling cutter is mainly used for milling plane. When rough milling, the diameter of the milling cutter is selected to be smaller, because the cutting force is large during rough milling, and the small diameter milling cutter can reduce the cutting torque. When the CNC machine tool is fine-milling, the diameter of the milling cutter should be larger, and it is better to accommodate the entire width of the surface to be machined, so as to improve the accuracy and efficiency of T machining. When the machining allowance of the machine tool is large and uneven, the diameter of the tool should be smaller, otherwise, the quality of the workpiece will be affected due to the deep tool mark of the hanging tool.

High-speed steel end mills are mostly used to process bosses and grooves, and are generally not used to process the surface of the blank, because the hardened layer and sand inclusion on the surface of the blank will accelerate tool wear.

When machining the surface of the blank or roughing the hole, the end mill or corn milling cutter with carbide inserts can be selected for powerful cutting.

When machining the peripheral contour of a plane workpiece, the end mill C is often used.

In order to improve the accuracy of the slot width and reduce the number of tool changes, a milling cutter with a diameter 7 times wider than the slot width can be used to mill the middle part of the slot first, and then use the tool radius compensation function to mill both sides of the slot.

When processing three-dimensional surfaces or variable bevel contours, ball-end milling cutters, annular milling cutters, drum milling cutters, conical milling cutters, disc milling cutters, etc. are often used.

When the machining allowance is small and the surface roughness requirements are high, a face milling cutter with cubic boron nitride inserts or ceramic inserts can be used to enable high-speed cutting of machine tools.